No Assembly, No Disassembly, Simply ‘Pour & Peel!’
Our High-Quality Silicone is set at an American standard. Meaning they are thicker and stronger, this doesn’t affect the flexibility of the mould, however.
Due to the moulds’ flexibility, there’s no need to clamp the piece of timber down to avoid floating anymore. Simply cut your piece of timber 1mm larger than the length of the mould, and your piece should fit nice and snug inside of the mould.
We’ve had the chance of stress testing this mould well over 50 times and haven’t noticed any wear or tears!
Due to the nature of Silicone, the resin will not stick to it. Making your job incredibly easy! They really do peel off in a matter of seconds.
Our Simply ‘Pour & Peel!’ method saves time and money by avoiding setup times and costs.
–Directions of Use:
Ensure your mould is clean and dry!
To clean your mould, simply wash it off with warm soapy water.
Don’t forget to make sure it is thoroughly dried before use.
We suggest cutting your piece of timber an mm above the internal space and put an hand weights on the top to ensure your piece doesn’t float after you’ve poured.
Simply enough, POUR!
Because there’s no setup, there’s no room for error.
No Disassembly, No Wacking.
Simply Peel your piece out of the mould!
Suitable with our Mica Pigments
Made from High-Quality Silicone, these American Grade Silicone Moulds are completely hassled free compared to all other HDPE moulds; no more messing around with your project! Simply pour and peal.
- American Grade
- High-Quality Silicone
- ‘Pour & Peel!’ Guarantee!
Available in-store or online now. Simply Google Aussie Camphor to find your closest store!